Installing the TINAlab card

TINA PRO version 5.x
====================

Windows 95/98
*************
Start the TINA Setup program.

Select "Custom" at the "Setup Type" dialog box and click Next. The Select 
dialog box will appear.

Select the program components you wish to install by checking the appropriate 
checkbox. By default, all components except the TINAlab Card are selected.

Check the TINAlab Device Driver checkbox (at the end of the list) and click Next.

Follow the instructions on the screen.

After TINA PRO has been successfully installed, start the 
Windows "Add New Hardware" program from the Control Panel.

When the "Do you want Windows to search for your new hardware" question appears, 
choose No.

Select Other Devices as hardware type in the next dialog box.

Click the Have Disk button.

Insert the TINAlab Driver & Calibration disk into drive A.

The Tinalab.inf file will be selected automatically.
 Click OK. 

The Install from disk dialog box will appear again. Click OK.

The Hardware Wizard dialog box will appear with the TINAlab Card in the 
first row. Click Next.

The hardware Setting dialog box will appear. You cannot change the settings yet. 
Click Next and then Finish.

Start Control Panel's System program and select Device Manager.

Doubleclick on "Data Acquisition Cards" and then on "Tinalab Card".
Select Resources and then set the three hardware settings to correspond to the 
settings on your TINAlab card.

The default settings on the TINAlab card are:

I/O range: 300
IRQ: 9
DMA: 1 (must be set to 3 in most cases where a sound card is installed already.)

When changing the settings, make sure that no conflicts arise.

Close the Device Manager program.

Restart your computer.

Windows NT
**********
Select Custom at the Setup Type dialog box and click Next. The Select 
dialog box will appear.

Select the program components you wish to install by checking the appropriate 
checkbox. By default, all components except the TINAlab Card are selected.

Check the TINAlab Device Driver checkbox (at the end of the list) and click Next.

Follow the instructions on the screen.

Under NT, the TINAlab software settings should be made in TINA using the 
T&M menu / Options /  HW Setup button.

Restart your computer after making the settings in TINA.  

Network Version
***************

Windows 95/98 Workstation
*************************
Install Tina on the server as described in the manual.

Start the TINA Workstation Setup program.

Check the TINAlab Device Driver checkbox and click Next.

Follow the instructions on the screen.

After TINA PRO has been successfully installed, start the 
Windows "Add New Hardware" program from the Control Panel.

When the "Do you want Windows to search for your new hardware" question appears, 
choose No.

Select Other Devices as hardware type in the next dialog box.

Click the Have Disk button.

Insert the TINAlab Driver & Calibration disk into drive A.

The Tinalab.inf file will be selected automatically.
 Click OK. 

The Install from disk dialog box will appear again. Click OK.

The Hardware Wizard dialog box will appear with the TINAlab Card in the 
first row. Click Next.

The hardware Setting dialog box will appear. You cannot change the settings yet. 
Click Next and then Finish.

Start Control Panel's System program and select Device Manager.

Doubleclick on "Data Acquisition Cards" and then on "Tinalab Card".
Select Resources and then set the three hardware settings to correspond to the 
settings on your TINAlab card.

The default settings on the TINAlab card are:

I/O range: 300
IRQ: 9
DMA: 1 (must be set to 3 in most cases where a sound card is installed already.)

When changing the settings, make sure that no conflicts arise.

Close the Device Manager program.

Restart your computer.

Windows NT Workstation
**********************
Install Tina on the server as described in the manual.

Start the TINA Workstation Setup program.

Check the TINAlab Device Driver checkbox and click Next.

Follow the instructions on the screen.

Under NT, the TINAlab software settings should be made in TINA using the 
T&M menu / Options /  HW Setup button.

Restart your computer after making the settings in TINA.  

For TINA 2.x, 3.x, 4.x users
============================

If you have purchased the TINAlab card previously with a version of TINA 
older then 5.0, you should install the calibration files from your 
"TINAlab Calibration Files" disk into your TINA directory using 
CLSETUP.EXE on the disk or by simply copying all .DAT files into the 
main TINA directory.

It is a good practice to copy all .DAT files from your old  
"TINAlab Calibration Files" disk onto the new 
"TINAlab Driver and Calibration" disk.


Installation of the TINAlab card with TINA 4.xx (including TINA Plus)
=====================================================================

Install TINA with the normal Setup procedure.

Insert your "TINAlab Calibration Files" disk into drive A:
Start CLSETUP.EXE on the disk. Follow the instructions on the screen.


Although the software settings can be made using CLSETUP.EXE, you can also 
set them in TINA the T&M menu / Options, and then clicking the HW Setup button.



  



























